<b>Test Pins/Pads</b><p> Cream on SMD OFF.<br> new: Attribute TP_SIGNAL_NAME<br> <author>Created by librarian@cadsoft.de</author> <b>TEST PAD</b> >NAME >VALUE >TP_SIGNAL_NAME TEST PAD SD Shield + Uno Res >NAME Switch PB >NAME Batt Con >NAME >VALUE Mic Power Switch Pot Add LED Speak <b>OSH Park Design Rules</b> <p> Please make sure your boards conform to these design rules. </p> <p> This DRC is very conservative, and is good for use with the auto-router. Auto-routers tend to generate unusual wiring layouts that both difficult to manufacture, and are tough to correct without experience. These conservative specs prevent these types of errors, ensuring your boards get fabbed without issue. </p> <p> Note, that not all DRC settings must be set by the manufacturer. Several can be adjusted for the design, including those listed on our docs page here. <a href="http://docs.oshpark.com/design-tools/eagle/design-rules-files/">Adjustable Settings</a> </p> Since Version 8.2, EAGLE supports online libraries. The ids of those online libraries will not be understood (or retained) with this version. Since Version 8.3, EAGLE supports URNs for individual library assets (packages, symbols, and devices). The URNs of those assets will not be understood (or retained) with this version. Since Version 8.3, EAGLE supports the association of 3D packages with devices in libraries, schematics, and board files. Those 3D packages will not be understood (or retained) with this version.