I'm a fourth year undergrad majoring in electrical & computer engineering. I'll be graduating in the Spring of 2021 and plan to work in CPU design following my graduation. My undergraduate studies have mainly focused on the areas of microarchitecture and RTL design / verification. https://www.linkedin.com/in/brandon-rawson/
Designed a PS2 driver using System Verilog and Intel Quartus Prime. The driver follows PS2 protocol and verification methods. It was designed using basic digital building blocks such as counters, shift registers, comparators, s...
Designed a four-layer PCB that contains a microcontroller to process inputs from mechanical switches. The PCB uses surface mount components and communicates keyboard strokes to a computer using a micro USB interface.
This overload detection system is used to detect when a user applies a voltage that is too high to an oscilloscope so that the internal relays can be switched off to prevent damage. This ECE Senior Design Capstone project is a ...
Currently designing an input overload detection system as a senior capstone project for Tektronix. This system is on track to be implemented into Tektronix oscilloscopes following the completion of the capstone project.
This project involved creating a two-axis Selective Compliance Assembly Robot Arm (SCARA) that is driven by the user's arm muscle contraction and wrist movement. The muscle contraction is detected with electromyography (EMG) se...