This project will use an ESP32 board and an LM75A temperature sensor to measure room temperature. This project will include an M2M_LM75A library created by M2M Solutions AB. Some things to keep in mind for this project: The temperature will be measured in degrees Celsius. User inputs will be included to allow the user to view the highest temp. value, lowest, temp. value, and the overall average of temperatures recorded in the serial port. The sensor will display 10-minute averages and the time interval will be measured in milliseconds. For this specific project, I will be measuring the temperature within my dorm room. My purpose here is to see how hot or cold my room gets between day and night. My expectation is that my room is much colder at night since there isn't much sun out at night and such. Some things to keep in mind: The heater has been disabled for the rest of the summer. The window will stay closed no matter what. Based on my recording and data, it would appear that my room temperature seems to increase at night rather than decrease. Hence, my room is colder during the day and hotter during the night.